Complete List of Digital Force Gages

Mark-10 Series 2 Economical Digital Force Gauge

Mark-10 Series 2 Economical Digital Force GaugeMeasures Push and Pull Force0.5% accuracy3 Year Warranty

The Mark-10 Series 2 is designed for basic tension and compression force testing applications up to 100 lbF (500 N). Peak tension and compression readings are reliably captured via the gauges' 0.5% accuracy and 500 Hz sampling rate. The Mark-10 Series 2 backlit graphic LCD displays the current, peak tension, or peak compression reading.The gauges are overload protected to 150% of capacity. An ergonomic, reversible aluminum housing allows for hand held use or fixture mounting, rugged enough for applications in both production and laboratory environments.

Please click on the links below for additional information on the models available for this product:

Mark-10 Series 3 Digital Force Gauge

Mark-10 Series-3 Digital Force Gauge2,000 Hz peak sampling rate0.3% accuracy3 Year Warranty

The Series 3 digital force gauge is designed for measuring tension and compression (push & pull) force testing in numerous applications. The gauges feature a sampling rate of 2,000 Hz, producing accurate results under a wide range of test conditions. The Mark-1- Series 3 backlit graphic LCD displays large characters, and a menu is available to access the gauges features and configurable parameters. USB output (non-streaming) is provided for data collection purposes. Set point indicators are provided for pass-fail testing. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. An ergonomic, reversible aluminum housing allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 3 digital force gauges are directly compatible with a wide range of test stands, grips, and software. The gauges include MESUR Lite data acquisition software. MESUR Lite tabulates continuous or single point data. One-click export to Excel allows for further data manipulation.

Please click on the links below for additional information on the models available for this product:

Mark-10 Series 5 Advanced Digital Force Gauge

Mark-10 Series 5 Advanced Digital Force Gage, Mitutoyo, and analog outputs 7,000 Hz peak sampling rate0.1% accuracy1,000 point data memory and statisticsReversible display

The Series-5 Advanced Digital Force Gage is designed for tension and compression force testing in quality control, manufacturing, and R&D areas. A range of capacities from 0.12 lb to 500 lb (0.5 N to 2500 N) is available to address numerous applications in the medical device, pharmaceutical, packaging, consumer products, automotive, aerospace, and other industries. The force gauges feature an industry-leading peak sampling rate of 7,000 Hz, producing accurate results even for quick-action tests. Accuracy is approximately 0.1% of full scale approximately 1 digit, and resolution is 1/5000. A large, backlit graphics LCD displays large, legible characters, while the simple menu navigation allows for quick access to the gauges many features and configurable parameters. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. On-board data memory for up to 1000 readings is included, as are statistical calculations and output to a PC. Integrated set points with indicators are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. The Series 5 averaging mode addresses the need to record the average force over time, useful in applications such as peel testing, while external trigger mode makes switch activation testing simple and accurate. An ergonomic aluminum design allows for hand held use or test stand mounting for more sophisticated testing requirements. The housing may be reversed in order for the load cell shaft to be oriented up or down, while the display and buttons remain upright.

Please click on the links below for additional information on the models available for this product:

Imada DST Digital Force Gauge

Imada DST Digital Force Gauge with OutputAccuracy 0.2%Measure force in lbs, Kgs or N7 Ranges up to 220 lbsUSB and RS-232C outputs

The Imada DST Digital Force Gauge are simple-to-use basic gauges featuring user-friendly menu operation. Selections including unit and measuring mode can be locked to prevent accidental changes.The Image DST large backlit LCD display can be configured in basic format to show value, unit and measuring mode or multi-line format to display peak and real time values simultaneously. Additional features include reversible display and high/low setpoints with OK indicator for Go/No Go testing.The gauges have a 30,000/sec sampling rate. Collect the data via USB or RS-232 connections with the Force Logger or SW-1X software (Both Optional)

Please click on the links below for additional information on the models available for this product:

Mark-10 Series 4 Advanced Digital Force Gauge

Mark-10 Series 4 Advanced Digital Force Gauge3,000 Hz peak sampling rate0.2% accuracy50 point data memory and statistics3 Year Warranty

The Series-4 Advanced Digital Force Gauge is designed for tension and compression force testing in numerous applications across virtually every industry. The gauges feature a sampling rate of 3,000 Hz, producing accurate results under a wide range of test conditions. Accuracy is 0.2% of full scale 1 digit, and resolution is 1/2000. A large, backlit graphics LCD displays large, legible characters, while the simple menu navigation allows for quick access to the gauges many features and configurable parameters. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. On-board data memory for up to 50 readings is included, as are statistical calculations and output to a PC. Integrated set points with indicators are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. An ergonomic, reversible aluminum design allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 4 digital force gauges are directly compatible with Mark-10 test stands, grips, and software. Series 4 gauges include MESUR Lite data acquisition software. MESUR Lite tabulates continuous or single point data from Series 5 and 4 gauges. Data saved in the gauges memory can also be downloaded in bulk. One-click export to Excel easily allows for further data manipulation.

Please click on the links below for additional information on the models available for this product:

Mark-10 Series 5I Advanced Force / Torque Indicator

Mark-10 Series 5I Advanced Force / Torque Indicator with USB Output & Software7,000 Hz sampling rate0.1% accuracy1,000 point data memory and statisticsUSB, RS-232, Mitutoyo, and analog outputs

The 5I is designed to work with a wide range of Mark-10 remote force and torque sensors. With exclusive Plug & TestTM technology, all calibration and configuration data is saved within the sensors smart connector, not the indicator, allowing for true interchangeability. Sensor password protection prevents use of an unauthorized sensor. In addition, all sensors are fully compatible with the more basic 3i force / torque indicator. The 5i shares its menu structure and most specifications with Series 5 digital force gauges. The sampling rate is a blazing fast 7,000 Hz, producing accurate results even for quick-action tests. A large, backlit graphics LCD displays large, legible characters, while the simple menu navigation allows for quick access to the indicators many features and configurable parameters. Data can be transferred to a PC or data collectors via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. On-board data memory for up to 1,000 readings is included, as are statistical calculations with output to a PC. Integrated set points with indicators and outputs are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. An analog load bar is shown on the display for graphical representation of applied force or torque. The 5is averaging mode addresses the need to record the average load over time, while external trigger mode makes switch activation testing simple and accurate. The 5i includes MESURTM Lite data acquisition software. MESURTM Lite tabulates continuous or single point data. Data saved in the indicators memory can also be downloaded in bulk. One-click export to Excel easily allows for further data manipulation.

Please click on the links below for additional information on the models available for this product:

Mark-10 Series 3I Force and Torque Indicator

Mark-10 Series 3I Force and Torque Indicator Torque Display2,000 Hz sampling rate0.2% accuracyUSB output

The 3i is designed to work with a wide range of Mark-10 remote force and torque sensors (see page 3). With exclusive Plug & Test technology, all calibration and configuration data is saved within the sensors smart connector, not the indicator, allowing for true interchangeability. In addition, all sensors are fully compatible with the advanced 5i force / torque indicator. The Mark-10 3i Force and Torque Indicator shares its menu structure and most specifications with Series 3 digital force gauges. The sampling rate is 2,000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu is available to access the gauges features and configurable parameters.The display also features an analog load bar for graphical representation of applied load, as well as set point indicators for pass-fail testing. USB output is provided for data collection purposes. The gauges include MESURTM Lite data acquisition software. MESURTM Lite tabulates continuous or single point data. One-click export to Excel allows for further data manipulation.

Please click on the links below for additional information on the models available for this product:

Mark-10 Series 7 Professional Digital Force Gauge

Mark-10 Series 7 Professional Digital Force Gauge with USB Output & Software14,000 Hz peak sampling rateContinuous data capture with 5,000-data point buffer and bulk output0.1% accuracy

The Series 7 is designed with a number of sophisticated features for the most demanding tension and compression measurement applications, up to 500 lbF (2500 N). The gauges feature 0.1% accuracy and a blazingly fast, industry-leading sampling rate of 14,000 Hz, producing reliable results for extremely quick-action tests. Mark-10 Series 7 gauges include all the functions of Series 5 gauges, with several additional features, including high speed continuous data capture and storage, with memory for up to 5,000 readings, at an acquisition rate of up to 14,000 Hz. The gauges also feature programmable footswitch sequencing, break detection, and 1st / 2nd peak detection. The Mark-10 Series 7 includes a coefficient of friction unit of measurement and user-defined unit of measurement. For productivity enhancement, the gauges also feature automatic data output, data storage, and zeroing functions upon the completion of break detection, averaging, external trigger, and 1st / 2nd peak detection. Series 7 force gauges are directly compatible with our ESM301 test stand, to permit functions such as break testing, tensile testing, compression testing, dynamic load holding, PC control capability, and many other applications.

Please click on the links below for additional information on the models available for this product:

Shimpo FGV-XY Digital Force Gage

Shimpo FGV-XY Digital Force Gage with USB OutputReversible Keypad and Display9 Ranges up to 200lbs1000 Hz Sample Rate, provides more accurate resultsUSB, RS-232, Analog Outputs

The FGV-XY Digital Force Gage is a precision instrument that delivers industry-leading value with an extensive list of features including USB output, reversible display and a rugged metal housing. Each gauge is supplied as a complete kit with several screw-on adapters providing a complete force testing instrument for use in a wide variety of industries. All models include built-in memory for 1000 values, easily downloaded via the USB data output to a PC using the software & cable supplied at no charge. Force values can be transferred in real time continuously or batch downloaded after testing is complete. In addition, RS-232C and analog outputs are also supplied providing the FGV-XY with maximum flexibility for data transfer and recording. Additionally, measurement statistics are automatically calculated and stored and can be recalled to the display for viewing or can be downloaded. Statistics include maximum, minimum, average and standard deviation. The FGV-XY provides is suitable for use in numerous industries & applications including incoming quality inspection, finished goods testing, R&D as well as on wire pull testing, wire crimps, trigger pull, brake pedal, aerospace, ceramic, springs, food ripeness, corrugated paper strength, blister pack, medical component, muscle strength, ergonomic testing, adhesives, syringe plunger, needle sharpness and many more.

Please click on the links below for additional information on the models available for this product:

Imada ZTA Series Digital Force Gauge

1000lb Capacity Wire Pull TesterSupplied with Heavy-Duty Wedge GripsManufacturer: ImadaWarranty: One Year

The ZTA Digital Force Gauge is supplied with Heavy-Duty Wedge Grips. The ZTA features a brand new intuitive user interface with easy-to-use menus. Select units, reverse the display, set high/low setpoints, and set all other functions using plain language menus. The ZTA Digital Force Gauge has an electro luminescent EL display. The vibrant display shows force value, unit, and peak, and can be configured with additional user-selectable data including memory data, +NG count, high/low setpoints, 1st and 2nd peaks, displacement value (using Imada test stand with FA?option), etc.

Please click on the links below for additional information on the models available for this product: